Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Mode Show Commands (M-P)
▀ show pdif-service
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
show pdif-service
Displays configuration information about PDIF services configured on the system.
Product
PDIF
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Displays configuration information and statistic counters for all PDIF services in the system.
Displays configuration information and statistic counters for a specified PDIF service in the system.
must be from 1 to 63 alpha and/or numeric characters and an existing PDIF service.
name
: Displays service statistics for a specific PDIF service.
must be from 1 to 63 alpha and/or
numeric characters and an existing PDIF service.
peer-address
peer-address
: Displays service statistics for a specifid peer server.
must be specified in
IP v4 dotted decimal notation.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command‘s Output section of the
Command Line Interface Overview chapter in the Cisco ASR 500 Series Command Line Interface Reference.
Usage
Use this command to display configuration information and statistics about PDIF services on the system.
Example
The following example displays configuration information about a PDIF service named
The following example displays configuration information about a PDIF service named
:
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.