Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Mode Show Commands (M-P)
▀ show power
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
show power
Displays information about installed cards with power supplied.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Default: chassis
: indicates power information for all cards is to be displayed.
: indicates the chassis power source(s) are to be displayed.
: specifies a specific card for which power information is to be displayed.
must be a
value in the range 1 through 48.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command‘s Output section of the
Command Line Interface Overview chapter in the Cisco ASR 500 Series Command Line Interface Reference.
Usage
View power source information to quickly check the power for all cards within a chassis.
Important:
On some platforms, only
is supported with no other keywords or variables.
Example
The following displays power supply status for the chassis.
The following displays power supply status for the chassis.
The following command displays the power status for all slots