Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Mode Show Commands (Q-S)
▀ show rohc counters
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
show rohc counters
This command displays ROHC counters for all active calls.
Product
PDSN, HSGW,
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
indicates all information is to be displayed.
indicates the information only for calls with Id
are to be displayed.
must be
specified as a 4-byte hexadecimal number.
: Specifies an international mobile subscriber ID only for which information is to be displayed.
The IMSI (International Mobile Subscriber Identity) ID is an up to 15-character field which identifies the
subscriber‘s home country and carrier: 3 digits of Mobile Country Code (MCC), 2 or 3 digits of Mobile
Network Code (MNC), followed by the Mobile Subscriber Identification Number MSIN. Example: 123-45-
678910234. May also be entered as 12345678910234.
subscriber‘s home country and carrier: 3 digits of Mobile Country Code (MCC), 2 or 3 digits of Mobile
Network Code (MNC), followed by the Mobile Subscriber Identification Number MSIN. Example: 123-45-
678910234. May also be entered as 12345678910234.
: Specifies a mobile subscriber IP address only for which information is to be displayed.
must be expressed in dotted decimal notation for IPv4 or colon notation for IPv6.
specifies a mobile subscriber ID only for which information is to be displayed.
must
be from 7 to 16 digits specified as an IMSI, MIN, or RMI.
: specifies a user only for which R-P information is to be displayed where the user is specified
as user_name.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter in the Command Line Interface Reference.