Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Firewall-and-NAT Policy Configuration Mode Commands
firewall udp-checksum-error ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
firewall udp-checksum-error
This command configures Stateful Firewall action on packets with UDP Checksum error.
Product
FW
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default:
Default:
Specifies to drop packets with UDP Checksum error.
Specifies to permit packets with UDP Checksum error.
Usage
Use this command to configure Stateful Firewall action on packets with UDP Checksum error.
For NAT-only calls, packets with UDP Checksum error are permitted.
For NAT-only calls, packets with UDP Checksum error are permitted.
Example
The following command specifies to drop packets with UDP Checksum error:
The following command specifies to drop packets with UDP Checksum error: