Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Firewall Ruledef Configuration Mode Commands
ip dst-address ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
ip dst-address
This command configures an access/firewall ruledef to analyze user traffic based on IP destination address.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes previously configured IP destination address ruledef.
specifies how to logically match the IP destination address.
must be one of the following:
must be one of the following:
: Does not equal
: Less than or equals
: Equals
: Greater than or equals
: Specifies the IP address of destination node for outgoing traffic in IPv4 or IPv6 standard
notation.
must be the IP address in dotted decimal notation for IPv4, or in colon notation for
IPv6.
: Specifies the IP address of destination node for outgoing traffic in IPv4 or IPv6
standard notation with subnet mask bit.
must be the IP address in dotted decimal
notation for IPv4, or in colon notation for IPv6 with subnet mask bit. The mask bit is a numeric value which
is the number of bits in the subnet mask.
is the number of bits in the subnet mask.
: Specifies the range criteria:
: Not in the range of
: In the range of
: Specifies the host pool name.
must be a string of 1 through 63
characters in length.
Usage
Use this command to specify an access/firewall ruledef to analyze user traffic based on the IP destination
address.
address.
Example