Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
ACS Charging Action Configuration Mode Commands
▀ ip vlan
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
ip vlan
This command configures the VLAN identifier to be associated with the IP address for the session.
Product
All
Privilege
Security Administrator, Administrator
Syntax
These options delete or disable the IP VLAN configuration.
must be an integer from 1 through 4094.
Usage
This command configures the subscriber VLAN ID which is used with the assigned address for the subscriber
session to receive packets. If the IP pool from which the address is assigned is configured with a VLAN ID,
then this subscriber configured VLAN ID overrides it.
Subscriber traffic can be routed to specific VLANs based on the configuration of their user profile. Using this
functionality provides a mechanism for routing all traffic from a subscriber over the specified VLAN. All
packets destined for the subscriber must also be sent using only IP addresses valid on the VLAN or they will
be dropped.
session to receive packets. If the IP pool from which the address is assigned is configured with a VLAN ID,
then this subscriber configured VLAN ID overrides it.
Subscriber traffic can be routed to specific VLANs based on the configuration of their user profile. Using this
functionality provides a mechanism for routing all traffic from a subscriber over the specified VLAN. All
packets destined for the subscriber must also be sent using only IP addresses valid on the VLAN or they will
be dropped.
Example
The following command sets the IP VLAN range to go up to
The following command sets the IP VLAN range to go up to
:
The following command sets the IP VLAN range back to default.