Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
▀ port atm
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
port atm
Identifies a physical port on a line card that supports ATM signaling and then enters the configuration mode for the
specific interface-type. For the commands to configure the port interface, see the CLI chapter ATM Port Configuration
Mode.
specific interface-type. For the commands to configure the port interface, see the CLI chapter ATM Port Configuration
Mode.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Indicates the port identified is an ATM interface port.
To determine valid ATM slot and port numbers, use the Exec mode‘s command
Identifies the chassis slot holding the line card that supplies ATM ports. The slot ID number can be
any valid integer between 17 and 48.
Identifies the physical port that is to be configured to support ATM signaling. The ID number can be
any valid integer between 1 and 4.
Usage
Change the current configuration mode to Ethernet Port Configuration mode.
Important:
This command is not supported on all platforms.
Example
The following enters the ATM port configuration mode for ATM port 1 on the card in slot 19:
The following enters the ATM port configuration mode for ATM port 1 on the card in slot 19: