Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
qos npu inter-subscriber traffic bandwidth-sharing ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
qos npu inter-subscriber traffic bandwidth-sharing
Configures NPU QoS bandwidth sharing properties for the system.
Product
PDSN, GGSN
Privilege
Administrator
Syntax
Enables bandwidth sharing for the specified criteria.
Disables bandwidth sharing for the specified criteria.
Specifies that the bandwidth action is to be applied to all PACs/PSC/PSC2s and every CPU on each
PAC/PSC/PSC2.
PAC/PSC/PSC2.
Specifies that the bandwidth action is to be applied to a PAC/PSC/PSC2 in a specific chassis slot number.
is an integer from 1 to 48 that represents the slot in which a PAC/PSC/PSC2 is installed. These
cards can be installed in slots 1 through 8, and/or 10 through 16.
Specifies a specific PAC/PSC/PSC2 CP for which to perform the bandwidth action.
is an integer value from 0 to 3. 0 represents the lead CP.
Usage
The available bandwidth of a subscriber queue can be shared equally among the other subscriber queues. Any
unutilized bandwidth of a queue can be shared with the other queues equally. For example, if only one DSCP
is configured and it is mapped to best-effort, that DSCP would get the bandwidth allocated to the best-effort
in addition to the rest of the bandwidth allocated to the gold, silver, and bronze.
By default, the system enables sharing for all PACs, PSCs, or PSC2s and their CPs.
For additional information on the NPU QoS functionality, refer to the System Administration and
Configuration Guide.
unutilized bandwidth of a queue can be shared with the other queues equally. For example, if only one DSCP
is configured and it is mapped to best-effort, that DSCP would get the bandwidth allocated to the best-effort
in addition to the rest of the bandwidth allocated to the gold, silver, and bronze.
By default, the system enables sharing for all PACs, PSCs, or PSC2s and their CPs.
For additional information on the NPU QoS functionality, refer to the System Administration and
Configuration Guide.
Important:
This functionality is not supported for use with the PDSN at this time.