Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
threshold aaa-acct-archive-size ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
threshold aaa-acct-archive-size
This command configures accounting message archive size threshold.
Product
PDSN, GGSN, HA, ASN GW
Privilege
Security Administrator, Administrator
Syntax
Default: 1
The high threshold number of archived accounting messages that must be met or exceeded within the polling
interval to generate an alert or alarm.
The number can be configured to any integer value between 0 and 1044000.
The high threshold number of archived accounting messages that must be met or exceeded within the polling
interval to generate an alert or alarm.
The number can be configured to any integer value between 0 and 1044000.
Default: 1
The low threshold number of archived accounting messages that maintains a previously generated alarm
condition. If the number of failures falls beneath the low threshold within the polling interval, a clear alarm
will be generated.
The number can be configured to any integer value between 0 and 1044000.
The low threshold number of archived accounting messages that maintains a previously generated alarm
condition. If the number of failures falls beneath the low threshold within the polling interval, a clear alarm
will be generated.
The number can be configured to any integer value between 0 and 1044000.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
In the event that the system cannot communicate with configured AAA accounting servers (RADIUS or
CGFs), either due to the server being busy or loss of network connectivity, the system buffers, or archives,
the accounting messages.
Accounting message archive size thresholds generate alerts or alarms based on the number of AAA
accounting messages buffered in the archive during the specified polling interval. Accounting requests are
counted for all AAA accounting servers that the system is configured to communicate with.
Alerts or alarms are triggered for accounting failures based on the following rules:
CGFs), either due to the server being busy or loss of network connectivity, the system buffers, or archives,
the accounting messages.
Accounting message archive size thresholds generate alerts or alarms based on the number of AAA
accounting messages buffered in the archive during the specified polling interval. Accounting requests are
counted for all AAA accounting servers that the system is configured to communicate with.
Alerts or alarms are triggered for accounting failures based on the following rules:
Enter condition: Actual number of archived messages ³ High Threshold
Clear condition: Actual number of archived messages < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end
of the polling interval.
Refer to the
of the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.
Example