Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
threshold cdr-file-space ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
threshold cdr-file-space
Configures the threshold for monitoring the percentage of total file space allocated for CDRs used during the polling
interval.
interval.
Product
ECS
Privilege
Security Administrator, Administrator
Syntax
Default: 90
The high threshold for percentage of total allocated CDR file space used that must be met or exceeded at the
end of the polling interval to generate an alert or alarm.
The high threshold for percentage of total allocated CDR file space used that must be met or exceeded at the
end of the polling interval to generate an alert or alarm.
is measured in percentage of total allocated CDR file space used and can be configured to
any integer value between 0 and 100. A value of 0 disables the threshold.
Default: 0
The low threshold for percentage of total allocated CDR file space used that maintains a previously generated
alarm condition. If the space usage falls below the low threshold within the polling interval, a clear alarm is
generated.
The low threshold for percentage of total allocated CDR file space used that maintains a previously generated
alarm condition. If the space usage falls below the low threshold within the polling interval, a clear alarm is
generated.
is measured in percentage of total allocated CDR file space used and can be configured to any
integer value between 0 and 100. A value of 0 disables the threshold.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the low threshold.
Usage
CDR file space usage generate alerts or alarms based on the percentage of total allocated CDR file space used
during the polling interval.
Alerts or alarms are triggered for CDR file space usage session based on the following rules:
during the polling interval.
Alerts or alarms are triggered for CDR file space usage session based on the following rules:
Enter condition: Actual percentage of allocated CDR file space usage ³ specified percentage of total
CDR file space.
Clear condition: Actual CDR file space used < specified clear percentage of total allocated CDR file
space usage.
If a trigger condition exists at the end of the polling interval, the alert or alarm will not be generated until the
end of the polling interval.
Refer to the
end of the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.