Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
threshold fw-drop-packet ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
threshold fw-drop-packet
This command configures thresholds for Stateful Firewall drop packets.
Product
FW
Privilege
Security Administrator, Administrator
Syntax
Disables the threshold and sets
and
to the default values.
Specifies the Stateful Firewall drop packets threshold value, which if met or exceeded generates an alert or
alarm.
alarm.
must be an integer from 0 through 1000000.
Default: 0
Specifies the Stateful Firewall drop packets clear threshold value. If, in the same polling interval, the
threshold falls below
threshold falls below
a clear alarm is generated.
must be an integer from 0 through 1000000.
Default: 0
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the low threshold.
Usage
When the number of drop packets exceed a given value, a threshold is raised and it is cleared when the
number of drop packets fall below a value within the polling interval.
Refer to the
number of drop packets fall below a value within the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.
Example
The following command configures a Stateful Firewall drop packets high threshold of
The following command configures a Stateful Firewall drop packets high threshold of
and a low threshold of
for a system using the Alarm thresholding model: