Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
threshold total-sgw-sessions ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
threshold total-sgw-sessions
Configures thresholds for the total number of S-GW sessions across all services in the system.
Product
S-GW
Privilege
Administrator
Syntax
Default: 0
The high threshold number of S-GW sessions for all S-GW services that must be met or exceeded within the
polling interval to generate an alert or alarm.
The number can be configured to any integer value from 1 through 1500000. A value of 0 disables the
threshold.
The high threshold number of S-GW sessions for all S-GW services that must be met or exceeded within the
polling interval to generate an alert or alarm.
The number can be configured to any integer value from 1 through 1500000. A value of 0 disables the
threshold.
Default: 0
The low threshold number of S-GW sessions for all S-GW services that maintains a previously generated
alarm condition. If the number of sessions falls beneath the low threshold within the polling interval, a clear
alarm will be generated.
The number can be configured to any integer value between 0 and 1500000. A value of 0 disables the
threshold.
The low threshold number of S-GW sessions for all S-GW services that maintains a previously generated
alarm condition. If the number of sessions falls beneath the low threshold within the polling interval, a clear
alarm will be generated.
The number can be configured to any integer value between 0 and 1500000. A value of 0 disables the
threshold.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Monitor and set alarms or alerts when the total number of S-GW sessions in the system is equal to or greater
than the set limit.
Alerts or alarms are triggered for S-GW sessions based on the following rules:
than the set limit.
Alerts or alarms are triggered for S-GW sessions based on the following rules:
Enter condition: Actual total number of S-GW sessions ³ High Threshold
Clear condition: Actual total number of S-GW sessions < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end
of the polling interval.
Refer to the
of the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.
Example
The following command configures a total number of S-GW sessions high threshold count of
The following command configures a total number of S-GW sessions high threshold count of
for an system
using the Alert thresholding model: