Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
GPRS Service Configuration Mode Commands
llc ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
llc
Configures the timers that control the data flow for the logical link control (LLC) sub-layer.
Important:
This command may be repeated as often as necessary to define the needed timers.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Resets the configuration to the default values.
Disables the
.
This keyword makes it possible for the operator to configure whether or not to send IOV-UI in an XID-
RESET. This is useful when the MS is not setup to accept IOV-UI (for example, MS sends Attach/RAU
Requests with cksn=7) and including IOV-UI in the XID-Reset would result in Attach/RAU failure.
Default: Enabled
RESET. This is useful when the MS is not setup to accept IOV-UI (for example, MS sends Attach/RAU
Requests with cksn=7) and including IOV-UI in the XID-Reset would result in Attach/RAU failure.
Default: Enabled
This keyword sets the maximum number of octets, per service access point identifier (SAPI), for the
downlink data packets. This is the upper limit that the SGSN will negotiate with the subscriber for packets
sent from the SGSN to the BSC.
downlink data packets. This is the upper limit that the SGSN will negotiate with the subscriber for packets
sent from the SGSN to the BSC.
: Command must identify one of the following SAPI: sapi11, sapi3, sapi5, or sapi9.
: Must be an integer from 140 to 1520. Default size is 1520 octets.
Defines LLC layer PDU lifetime at the BSC. .