Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
GTP-U Service Configuration Mode Commands
echo-interval ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
echo-interval
Configures the rate at which GPRS Tunneling Protocol (GTP) v1-U echo packets are sent.
Product
GGSN, P-GW, S-GW
Privilege
Administrator
Syntax
Returns the command to its default setting of disabled.
Removes the configured echo-interval setting.
Specifies the number of seconds between the sending of a GTP-Uv1 echo packet.
must be an
integer value from 60 to 3600.
Usage
Use this command to configure the rate at which GTP-Uv1 echo packets are sent.
Example
The following command sets the rate between the sending of echo packets at
The following command sets the rate between the sending of echo packets at
seconds: