Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
HA Service Configuration Mode Commands
▀ threshold ipsec-ike-failrate
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
threshold ipsec-ike-failrate
Configures a threshold for the percentage of IPSec IKE failures.
Product
HA
Privilege
Security Administrator, Administrator
Syntax
ipsec-ike-failrate
Deletes the alert or alarm.
Default: 0
The high threshold percentage of IPSec IKE failures per second must be met or exceeded within the polling
interval to generate an alert or alarm.
The high threshold percentage of IPSec IKE failures per second must be met or exceeded within the polling
interval to generate an alert or alarm.
can be configured to any integer value between 0 and 100.
Default:0
The low threshold percentage of IPSec IKE failures per second that must be met or exceeded within the
polling interval to clear an alert or alarm.
The low threshold percentage of IPSec IKE failures per second that must be met or exceeded within the
polling interval to clear an alert or alarm.
can be configured to any integer value between 0 and 100.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Use this command to set an alert or an alarm when the percentage of IPSec IKE failures is equal to or greater
than a specified number per second.
Alerts or alarms are triggered for the percentage of IPSec IKE failures on the following rules:
than a specified number per second.
Alerts or alarms are triggered for the percentage of IPSec IKE failures on the following rules:
Enter condition: Percentage of IPSec IKE failures > High Threshold
Clear condition: Percentage of IPSec IKE failures £ Low Threshold
Example
The following command configures a percentage of IPSec IKE failures threshold of 1000 and a low threshold of 800 for
a system using the Alarm thresholding model:
threshold ipsec-ike-failrate 90 clear 80
The following command configures a percentage of IPSec IKE failures threshold of 1000 and a low threshold of 800 for
a system using the Alarm thresholding model:
threshold ipsec-ike-failrate 90 clear 80