Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
HA Service Configuration Mode Commands
threshold ipsec-tunnels-established ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
threshold ipsec-tunnels-established
Configures a threshold for the total IPSec tunnels established.
Product
HA
Privilege
Security Administrator, Administrator
Syntax
ipsec-tunnels-established
Deletes the alert or alarm.
Default: 0
The high threshold number of IPSec tunnels established per second must be met or exceeded within the
polling interval to generate an alert or alarm.
The high threshold number of IPSec tunnels established per second must be met or exceeded within the
polling interval to generate an alert or alarm.
can be configured to any integer value between 0 and 1000000.
Default:0
The low threshold number of call IPSec tunnels established per second that must be met or exceeded within
the polling interval to clear an alert or alarm.
The low threshold number of call IPSec tunnels established per second that must be met or exceeded within
the polling interval to clear an alert or alarm.
can be configured to any integer value between 0 and 1000000.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Use this command to set an alert or an alarm when the number of IPSec tunnels established is equal to or
greater than a specified number per second.
Alerts or alarms are triggered for the number of IPSec tunnels established on the following rules:
greater than a specified number per second.
Alerts or alarms are triggered for the number of IPSec tunnels established on the following rules:
Enter condition: Actual number of IPSec tunnels established > High Threshold
Clear condition: Actual number of IPSec tunnels established £ Low Threshold
Example
The following command configures a number of IPSec tunnels established threshold of 1000 and a low threshold of 800
for a system using the Alarm thresholding model:
threshold ipsec-tunnels-established 1000 clear 800
The following command configures a number of IPSec tunnels established threshold of 1000 and a low threshold of 800
for a system using the Alarm thresholding model:
threshold ipsec-tunnels-established 1000 clear 800