Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
HSGW Service Configuration Mode Commands
ip ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
ip
Sets the use of Robust Header Compression (RoHC) and enters the HSGW Service ROHC Configuration Mode where
RoHC parameters are configured for the service.
RoHC parameters are configured for the service.
Configures the local User Datagram Protocol (UDP) port for the A10/A11 interface IP socket.
Sets the parameters for IP source validation. Source validation is useful if packet spoofing is suspected or for verifying
packet routing and labeling within the network.
packet routing and labeling within the network.
Source validation requires the source address of received packets to match the IP address assigned to the subscriber
(either statically or dynamically) during the session.
(either statically or dynamically) during the session.
Product
HSGW
Privilege
Administrator
Syntax
Resets the keyword to its default value.
: Removes the RoHC configuration from this service.
: Disables the ability of the service to reset the
reneg-limit and drop-limit counters after receipt of a properly addressed packet.
Specifies that Robust Header Compression will be applied to sessions using this service and enters the
HSGW Service RoHC Configuration Mode where RoHC parameters are configured.
HSGW Service RoHC Configuration Mode where RoHC parameters are configured.
Default: 699
Specifies the UDP port number.
Specifies the UDP port number.
can be any integer value between 1 and 65535.
Default: disabled
Configures the service to reset the reneg-limit and drop-limit counters after receipt of a properly addressed
packet.
Configures the service to reset the reneg-limit and drop-limit counters after receipt of a properly addressed
packet.