Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
IPv6 to IPv4 Tunnel Interface Configuration Mode Commands
▀ mode
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
mode
Configures the mode of IPv6 to IPv4 tunneling. The default is set to manual mode.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Configures automatic 6to4 IPv6 to IPv4 tunnels as specified in RFC 3056.
Configures point-to-point manual IPv6 to IPv4 tunnels by specifying IPv4 address of the tunnel remote end.
Resets the mode of IPv6 to IPv4 tunneling to manual mode.
Usage
There can be only one 6to4 tunnel possible in a context. Once a 6to4 tunnel is configured, all subsequent
tunnels will be configured as manual tunnels.
tunnels will be configured as manual tunnels.
Example
The following command configures the mode to 6to4.
The following command configures the mode to 6to4.
The following command configures the mode to 6to4.