Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
ACS Configuration Mode Commands
policy-control burst-size ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
policy-control burst-size
This command configures the burst size for bandwidth limiting per dynamic-rule or per bearer.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default: 65535 bytes
Default: 65535 bytes
Configures the burst size equal to <seconds> of traffic.
Default: 10 seconds
Default: 10 seconds
Specifies the seconds of traffic configured for burst size.
must be an integer from 1 through 20.
Configures the burst size in bytes.
must be an integer from 1 through 4000000000.
Usage
Use this command to configure the burst size for bandwidth limiting per dynamic-rule or per bearer.
Example
The following command configures the burst size for bandwidth limiting per dynamic-rule or per bearer equal to 10
seconds of traffic:
The following command configures the burst size for bandwidth limiting per dynamic-rule or per bearer equal to 10
seconds of traffic: