Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
PDG Service Configuration Mode Commands
ip qos-dscp ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
ip qos-dscp
Configures the quality of service (QoS) differentiated service code point (DSCP) used when sending data packets over
the Wu interface in the downlink direction.
the Wu interface in the downlink direction.
Product
PDG/TTG
Privilege
Security Administrator, Administrator
Syntax
Disables the overriding of the ToS (Type of Service) field and enables the pass-through option.
Specifies the DSCP marking to be used for packets of sessions subscribed to the 3GPP background class, in
which the data transfer is not time-critical (for example, in e-mail exchanges). This traffic class is the lowest
QoS.
which the data transfer is not time-critical (for example, in e-mail exchanges). This traffic class is the lowest
QoS.
Set the DSCP for the specified traffic class. See the
section below.
Specifies the DSCP marking to be used for packets of sessions subscribed to the 3GPP conversational class,
in which there is a constant flow of traffic in both the uplink and downlink direction. This traffic class is the
highest QoS.
in which there is a constant flow of traffic in both the uplink and downlink direction. This traffic class is the
highest QoS.
: Set the DSCP for the specified traffic pattern. See the dscp section below.
Specifies the DSCP marking to be used for packets of sessions subscribed to three possible traffic priorities in
the 3GPP interactive class, in which there is an intermittent flow of packets in the uplink and downlink
direction. This traffic class has a higher QoS than the background class, but not as high as the streaming class.
traffic_priority is the 3GPP traffic handling priority and can be the integers 1,2 or 3.
the 3GPP interactive class, in which there is an intermittent flow of packets in the uplink and downlink
direction. This traffic class has a higher QoS than the background class, but not as high as the streaming class.
traffic_priority is the 3GPP traffic handling priority and can be the integers 1,2 or 3.
Specifies the DSCP for the interactive class if the allocation priority is present in the QoS profile.
can be the integers 1, 2, or 3.
DSCP uses the values in the following table based on the traffic handling priority and allocation/retention
priority if the allocation priority is present in the QOS profile.
priority if the allocation priority is present in the QOS profile.
Allocation Priority
1
2
3
Traffic Handling Priority