Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
PDSN Service Configuration Mode Commands
access-flow traffic-validation ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
access-flow traffic-validation
if
is enabled for the service and the subscriber then the flows are checked
against the filter rules. If the packets does not match the filter rules, and N violations occur in K seconds, the rp
connection is downgraded to best-effort flow, if it is not already a best-effort flow
connection is downgraded to best-effort flow, if it is not already a best-effort flow
Product
PDSN
Privilege
Security Administrator, Administrator
Syntax
Disable traffic validation for the service.
violations
: Sets the parameters that determine traffic access violations. This is determined by setting
the maximum number of violations within a set time period. must be an integer from 1 through 100000.
interval
interval
Sets the time interval, in seconds. must be an integer from 1 through 100000.
Usage
Use this command to enable traffic validation for the current PDSN service.
Example
The following command enables traffic validation for the current PDSN service and sets the limit allowed to
The following command enables traffic validation for the current PDSN service and sets the limit allowed to
violations within seconds: