Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
PDSN Service Configuration Mode Commands
qos update ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
qos update
Use this command to set QoS update parameters for policy mismatches or wait timeouts.
Product
PDSN
Privilege
Security Administrator, Administrator
Syntax
Enables/Disables the
[
|
].
Sets / Restores default value for
[
|
].
PDSN raises a TFT violation if there is a QoS policy mismatch.
Sets the wait time for A11 RRQ for QoS changes.
must be an integer from 1 through 1000.
: configures the action on the wait-timeout
: Drops the call if the A11 RRQ has not been received for the QoS update.
This includes all of the IP flows for the session.
: Drops packets if the A11 RRQ has not been received for the QoS
update. Sends the forward traffic over best effort (flow FF or FE if available).
: Drops packets if the A11 RRQ has not been received for the QoS update.
Usage
This command provides a PDSN service level configurable to configure an action, if the PCF ignores the QoS
Update request from PDSN. It sets the amount of time to wait and the action to take, if no RRQ is received
before the timeout. The action can be to drop packets for the flow, disconnect the session or to downgrade to
best effort.
Update request from PDSN. It sets the amount of time to wait and the action to take, if no RRQ is received
before the timeout. The action can be to drop packets for the flow, disconnect the session or to downgrade to
best effort.
Example