Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
PDSN Service Configuration Mode Commands
▀ retransmission-timeout
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
retransmission-timeout
Configures the maximum allowable time for the PDSN service to wait for a response from the PCF before it a) attempts
to communicate with the PCF again (if the system is configured to retry the PCF) or b) marks the PCF as unreachable.
to communicate with the PCF again (if the system is configured to retry the PCF) or b) marks the PCF as unreachable.
Product
PDSN
Privilege
Security Administrator, Administrator
Syntax
Enables/Disables the
.
Sets / Restores default value assigned for
.
Specifies the maximum allowable time for the PDSN service to wait for a response from the PCF before it a)
attempts to communicate with the PCF again (if the system is configured to retry the PCF) or b) marks the
PCF as unreachable.
time is measured in seconds and can be configured to any integer value between 1 and 1,000,000.
attempts to communicate with the PCF again (if the system is configured to retry the PCF) or b) marks the
PCF as unreachable.
time is measured in seconds and can be configured to any integer value between 1 and 1,000,000.
Usage
Use the retransmission timeout command in conjunction with the
command in
order to configure the PDSN services behavior when it does not receive a response from a particular PCF.
Use the
Use the
command to delete a previously configured timeout value. If
after deleting the lifetime setting you desire to return the lifetime parameter to its default setting, use the
command.
The chassis is shipped from the factory with the retransmission timeout set to 3 seconds.
Example
The following command configures a retransmission timeout value of seconds:
The following command configures a retransmission timeout value of seconds:
The following command deletes a previously configured retransmission-timeout setting: