Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
PVC Interface Configuration Mode Commands
▀ ip access-group
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
ip access-group
This command identities the access control list (ACL to be associated with this PVC interface in this context.
Important:
Prior to using this command, the access list must be created for this context with the
command in the Context configuration mode and then the ACL must be configured using the commands
described in CLI chapter ACL Configuration Mode.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Indicates the specified access group to be removed from the access list.
Specifies the access control list (ACL) rule to be added or removed from the group.
Must be a string of 1 to 79 alphanumeric characters with no spaces.
Important:
Up to 8 ACLs can be applied to a group provided that the number of rules configured within the
ACL(s) does not exceed the 128 rule limit for the interface.
Specifies list is for in-bound access control.
Specifies the list is for out-bound access control.
Important:
Even though ―in‖ or ―out‖ can be specified, context-level ACL rules are automatically applied to
both directions.
Usage
Use this command to add IP access lists configured for the same context to an IP access-group. The list can
be configured to apply to all inbound and/or outbound traffic.
be configured to apply to all inbound and/or outbound traffic.
Example