Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
RoHC Profile Compression Configuration Mode Commands
optimistic-repeats ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
optimistic-repeats
For transition from the FO (First Order) to the SO (Second Order) state, the compressor should be confident that the
decompressor has all the parameters needed to decompress according to a fixed pattern.The compressor obtains its
confidence about decompressor status by sending several packets with the same information according to the lower
compression state. If the decompressor receives any of these packets, it is in sync with the compressor. This command
defines the number of repeated packets to send to the decompressor.
decompressor has all the parameters needed to decompress according to a fixed pattern.The compressor obtains its
confidence about decompressor status by sending several packets with the same information according to the lower
compression state. If the decompressor receives any of these packets, it is in sync with the compressor. This command
defines the number of repeated packets to send to the decompressor.
Product
HSGW, PDSN
Privilege
Administrator
Syntax
Returns the command to its default value.
Default: 6
The number of packets to repeat with the same information to assure synchronization with the decompressor.
The number of packets to repeat with the same information to assure synchronization with the decompressor.
must be an integer from 0 through 10.
Usage
Use this command to set the number of packets to repeat to the decompressor to assure synchronization
before transition states.
before transition states.
Example
The following command sets the number of repeated packets to 5:
The following command sets the number of repeated packets to 5: