Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
SGSN Pool Area Configuration Mode Commands
hash-value ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
hash-value
This command configures the load distribution for the VLRs that service this pool area.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Removes the configured Gs procedures from this Gs service.
Specifies the specific hash value for VLR(s).
must be an integer value from 0 through 999.
Specifies the range of hash values for a VLR.
specifies the start value for range of hash and is an integer value from 0 through 999.
must be lower than
must be lower than
specifies the end value for range of hash and is an integer value from 0 through 999.
must be higher than
must be higher than
.
This keyword assign all non-configured hash values to use the named VLR.
Specifies the name of the VLR to be associated with this pool area.
is the name of VLR and must be an alpha and/or numeric string of 1 to 63 characters.
Usage
Use this command to command configures the load distribution for the VLRs that service this pool area as
defined in TS 23.236.
The algorithm for selection of VLR from a pool area is based on the hash value computed on the IMSI digits.
The SGSN derives a hash value (V) using procedure as defined in TS 23.236. Every hash value from the
range 0 to 999 corresponds to a single MSC/VLR node. Typically many hash values may point to the same
MSC/VLR node.
This command can be entered multiple times for different hash value.
defined in TS 23.236.
The algorithm for selection of VLR from a pool area is based on the hash value computed on the IMSI digits.
The SGSN derives a hash value (V) using procedure as defined in TS 23.236. Every hash value from the
range 0 to 999 corresponds to a single MSC/VLR node. Typically many hash values may point to the same
MSC/VLR node.
This command can be entered multiple times for different hash value.