Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Subscriber Configuration Mode Commands
▀ fw-and-nat policy
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
fw-and-nat policy
Important:
This command is customer-specific and is only available in StarOS 8.1. This command must be used
to configure the Policy-based Firewall-and-NAT feature.
This command configures the Firewall-and-NAT policy for the subscriber.
Product
FW, NAT
Privilege
Security Administrator, Administrator
Syntax
Specifies that the default Firewall-and-NAT policy configured in the rulebase be used for the subscriber.
Disables Firewall and NAT processing for the subscriber.
Specifies the Firewall-and-NAT policy for the subscriber.
must be an alpha and/or numeric string of 1 through 63 characters in length. Note that
this policy will override the
configured in the ACS rulebase.
Usage
Use this command to configure the Firewall-and-NAT policy for subscribers. Note that the policy configured
in the subscriber mode will override the default policy configured in the ACS rulebase. If a policy is not
configured in the subscriber mode, the default policy configured in the ACS rulebase will be applied.
in the subscriber mode will override the default policy configured in the ACS rulebase. If a policy is not
configured in the subscriber mode, the default policy configured in the ACS rulebase will be applied.
Example
The following command configures a Firewall-and-NAT policy named
The following command configures a Firewall-and-NAT policy named
for the subscriber: