Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Subscriber Configuration Mode Commands
▀ ip address secondary-pool
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
ip address secondary-pool
Configures secondary IP address pool properties for the subscriber to provide multiple IP host configuration behind one
WiMAX CPE.
WiMAX CPE.
Product
ASN GW
Privilege
Security Administrator, Administrator
Syntax
Removes a previously configured auxiliary pool named
for multiple host support in ASN
GW service.
Specifies the secondary/auxiliary IP address pool or IP address pool group from which the IP address is
assigned to host behind a WiMAX CPE having primary IP address.
assigned to host behind a WiMAX CPE having primary IP address.
must be the name of an existing IP pool or IP pool group and from 1 to 31 alpha and/or numeric
characters.
Usage
Use this command to specify the name of an IP address pool configured on the system from which IP
addresses are to be dynamically assigned to host behind a WiMAX CPE for multiple host session support.
This command designates the IP address to secondary hosts from locally configured secondary IP address
pool. To enable multiple host support behind a WiMAX CPE and configure maximum number of supported
hosts use
addresses are to be dynamically assigned to host behind a WiMAX CPE for multiple host session support.
This command designates the IP address to secondary hosts from locally configured secondary IP address
pool. To enable multiple host support behind a WiMAX CPE and configure maximum number of supported
hosts use
command in ASN Gateway Service Configuration mode.
Example
The following command configures the subscriber to receive IP addresses from a secondary IP address pool named
The following command configures the subscriber to receive IP addresses from a secondary IP address pool named
for secondary hosts behind the WiMAX CPE: