Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Subscriber Configuration Mode Commands
▀ timeout long-duration
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
timeout long-duration
Configures the long duration timeout and optionally the inactivity duration of HA subscriber session.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Indicates the timeout specified is to be returned to its default behavior. If no specific
timeout is specified then all are set to their default behavior.
timeout is specified then all are set to their default behavior.
Default: 0
Designates the maximum duration of the session, in seconds, before the system automatically
reports/terminates the session.
Designates the maximum duration of the session, in seconds, before the system automatically
reports/terminates the session.
must be a value in the range from 0 through 4294967295.
The special value 0 disables the timer.
Specifies the maximum amount of time, in seconds, before the specified session is
marked as dormant.
marked as dormant.
must be a value in the range from 0 through 4294967295.
The special value 0 disables the inactivity time specified.
Usage
Use this command to set the long duration timeout period and inactivity timer for subscriber sessions. Reduce
the idle timeout to free session resources faster for use by new requests.
Refer to the long-duration-action detection and long-duration-action disconnection section for more
information.
the idle timeout to free session resources faster for use by new requests.
Refer to the long-duration-action detection and long-duration-action disconnection section for more
information.
Example
Following command sets the long duration timeout duration to 300 seconds and inactivity timer for subscriber session to
45 seconds:
Following command sets the long duration timeout duration to 300 seconds and inactivity timer for subscriber session to
45 seconds: