Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Traffic Policy-Map Configuration Mode Commands
▀ qos encaps-header
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
qos encaps-header
Enables and configures Quality of Service (QoS) policy to use Differentiated Service Code Point (DSCP) marking in IP
header field for the flow-based traffic policing to subscriber session flow.
header field for the flow-based traffic policing to subscriber session flow.
Product
PDSN, HA, ASN GW
Privilege
Security Administrator, Administrator
Syntax
{
|
[
] }
{
|
[
]}
Enables/Disables the
The value must be expressed as a hexadecimal value from 0x00 through 0x3F.
Specifies the DSCP code value marked in IP header of packet/flow to determine the QoS for traffic policing.
The value must be expressed as a hexadecimal value from 0x00 through 0x3F.
The value must be expressed as a hexadecimal value from 0x00 through 0x3F.
Specifies to use DSCP code value from user datagram (UDP header) to determine the QoS for traffic
policing.
policing.
Specifies to override the highest priority DSCP value signaled by the PCF.
Specifies to use the DSCP value copied from the user datagram.
Usage
Use this command to apply the QoS policy based on DSCP code value encapsulated in IP packet header or
User datagram packet to subscriber session flow for flow-based traffic policing.
User datagram packet to subscriber session flow for flow-based traffic policing.
Important:
Details on the QoS traffic policing functionality is located in the System Administration and
Configuration Guide.
Example
The following command sets QoS policy with DSCP code value to 0x0C for Class 1, silver (AF12):
The following command sets QoS policy with DSCP code value to 0x0C for Class 1, silver (AF12):