Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Tunnel Interface Configuration Mode Commands
tunnel-mode ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
tunnel-mode
This command configures the tunnel mode type for specific tunnel interface. It also creates the specific tunnel
configuration mode if required.
configuration mode if required.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Sets the default tunnel mode for this interface. By default tunnel mode is set to IPv6-to-IPv4 type.
Default: Disabled
This keyword sets the tunnel interface mode to GRE type and creates the GRE tunnel Configuration mode if
required.
This keyword sets the tunnel interface mode to GRE type and creates the GRE tunnel Configuration mode if
required.
Default: Enabled
This keyword sets the tunnel interface mode to IPv6-to-IPv4 type and creates the IPv6-to-IPv4 Tunnel
Configuration mode, if required.
This keyword sets the tunnel interface mode to IPv6-to-IPv4 type and creates the IPv6-to-IPv4 Tunnel
Configuration mode, if required.
Usage
Use this command to set the tunnel mode type of GRE or IPv6-to-IPv4 for tunneling interface.
Example
The following command sets the tunnel mode to GRE for specific interface:
The following command sets the tunnel mode to GRE for specific interface: