Cisco Cisco Packet Data Interworking Function (PDIF) Manual De Mantenimiento
AAA Interface Configuration
▀ Configuring RADIUS AAA Functionality
▄ Cisco ASR 5000 Series AAA Interface Administration and Reference
OL-22955-01
Optional. To configure the maximum number of times RADIUS authentication requests must be re-transmitted,
in the Context Configuration Mode, use the following command:
Optional. If RADIUS is configured for PDSN service, to configure the accounting trigger options for R-P
originated calls to generate STOP immediately or to wait for active-stop from old PCF on handoff, in the
Context Configuration Mode, use the following command:
Context Configuration Mode, use the following command:
For more information on configuring additional accounting trigger options for R-P generated calls for a PDSN
service, refer to the
service, refer to the
command in the Command Line Interface Reference.
Optional. To configure the system to check for failed RADIUS AAA servers, in the Context Configuration
Mode, use the following command:
After a server‘s state is changed to ―Down‖, the deadtime timer is started. When the timer expires, the server‘s
state is returned to ―Active‖. If both
state is returned to ―Active‖. If both
and
are configured,
then both parameters have to be met before a server‘s state is changed to ―Down‖. For a complete explanation
of RADIUS server states, refer RADIUS Server State Behavior appendix.
of RADIUS server states, refer RADIUS Server State Behavior appendix.
Optional. To configure the system to check for failed RADIUS accounting servers, in the Context Configuration
Mode, use the following command:
After a server‘s state is changed to ―Down‖, the deadtime timer is started. When the timer expires, the server‘s
state is returned to ―Active‖. If both
state is returned to ―Active‖. If both
and
are configured,
then both parameters have to be met before a server‘s state is changed to ―Down‖. For a complete explanation
of RADIUS server states, refer RADIUS Server State Behavior.
of RADIUS server states, refer RADIUS Server State Behavior.
Optional. If required, users can configure the dynamic redundancy for HA as described in the HA Redundancy
for Dynamic Home Agent Assignment chapter of the System Enhanced Feature Configuration Guide.
Verifying Your Configuration
To verify your configurations:
In the Exec mode, enter the following command:
The output displays a concise list of settings that you have configured for the context.