Cisco Cisco Packet Data Interworking Function (PDIF) Manual De Mantenimiento
AAA Interface Configuration
Configuring Diameter AAA Functionality ▀
Cisco ASR 5000 Series AAA Interface Administration and Reference ▄
OL-22955-01
Configuring Diameter AAA Functionality at Context Level
There are context-level Diameter parameters that must be configured to provide AAA functionality for subscriber
sessions. As noted in Understanding the System Operation and Configuration chapter of the System Administration
Guide, AAA functionality can be configured within any context, even its own.
sessions. As noted in Understanding the System Operation and Configuration chapter of the System Administration
Guide, AAA functionality can be configured within any context, even its own.
This section describes how to configure the Diameter-based AAA parameters at the context level. To configure
Diameter-based AAA parameters at the system level, see
Diameter-based AAA parameters at the system level, see
Important:
This section provides the minimum instruction set to configure context-level Diameter
AAA functionality that allows the system to process data sessions. Commands that configure additional
context-level AAA properties are provided in Understanding the System Operation and Configuration
chapter of the System Administration Guide.
context-level AAA properties are provided in Understanding the System Operation and Configuration
chapter of the System Administration Guide.
To configure Diameter AAA functionality at the context level use the following configuration:
Notes:
must be the name of the system context designated for AAA configuration.
must be the same Diameter endpoint name configured in the
Optional. To configure the number of retry attempts for a Diameter authentication request with the same server,
if the server fails to respond to a request, in the Context Configuration Mode, use the following command:
Optional. To configure the maximum number of transmission attempts for a Diameter authentication request, in
the Context Configuration Mode, use the following command. Use this in conjunction with the
option to control how many servers will be attempted to communicate with.