Cisco Cisco Packet Data Interworking Function (PDIF) Manual De Mantenimiento
RADIUS Attribute Definitions
▀ Attributes
▄ Cisco ASR 5000 Series AAA Interface Administration and Reference
OL-22955-01
4
Value
IPv4 Address
WiMAX-Hotline-Indicator
WiMAX-Hotline-Indicator
Type
This attribute in a RADIUS Accounting-Request message indicates to back-office systems (billing audit systems)
that the session has been Hot-Lined.
that the session has been Hot-Lined.
Type
26
Vendor ID
24757
VSA Type
24
Length
1–246
Value
Opaque value
WiMAX-Idle-Mode-Transition
A flag indicating whether the mobile node is in idle mode or not. When the mobile node enters or exits idle mode, an interim
accounting message that includes WiMAX-Idle-Mode-Transition(26/44) attribute is generated instantly. The value of this
attribute is 1 when mobile enters idle mode, and 0 when mobile exits idle mode. If accounting mode is flow based, then the
asynchronous interim message is generated only for an ISF and not for all the flows in the session. Regular interim accounting
if enabled, is not affected by idle mode entry. Also, the regular interim messages will not include WiMAX-Idle-Mode-
Transition attribute.
accounting message that includes WiMAX-Idle-Mode-Transition(26/44) attribute is generated instantly. The value of this
attribute is 1 when mobile enters idle mode, and 0 when mobile exits idle mode. If accounting mode is flow based, then the
asynchronous interim message is generated only for an ISF and not for all the flows in the session. Regular interim accounting
if enabled, is not affected by idle mode entry. Also, the regular interim messages will not include WiMAX-Idle-Mode-
Transition attribute.
Type
26
Vendor ID
24757
VSA Type
44
Length
1
Value
Enumerated integer. Supported values are:
In idle mode = 0x01
Not in idle mode = 0x00
Not in idle mode = 0x00