Cisco Cisco Packet Data Interworking Function (PDIF) Manual De Mantenimiento
G-CDR and Enhanced G-CDR Field Reference Tables
CDR Fields Supported in eG-CDRs ▀
Cisco ASR 5000 Series AAA Interface Administration and Reference ▄
OL-22955-01
Field
Category
Description
Charging
Characteristics
Selection Mode
Characteristics
Selection Mode
O
Holds information about how Charging Characteristics were selected.
SGSN PLMN
Identifier
Identifier
O
SGSN PLMN Identifier (MCC and MNC) used during this record.
Served IMEISV
O
IMEISV of the ME, if available.
RAT Type
O
This field indicates the Radio Access Technology (RAT) type currently used by the Mobile
Station as defined in TS 29.060. The field is present in the G-CDR if provided by SGSN.
Station as defined in TS 29.060. The field is present in the G-CDR if provided by SGSN.
MS Time Zone
O
This field contains the MS Time Zone the MS is currently located as defined in TS 29.060, if
provided by SGSN.
provided by SGSN.
User Location
Information
Information
O
This field contains the User Location Information of the MS as defined in TS 29.060, if
provided by SGSN.
provided by SGSN.
List of Service Data
Volumes
Volumes
O
A list of the changes that occurred in charging conditions for all service data flows for the
PDP context.
PDP context.
List of Traffic Data Volumes
List of Traffic Data Volumes
QoS Requested (not in G-CDR)
N/A
QoS Negotiated
O
QoS Negotiated indicates the applied QoS accepted by the network.
Data Volume Uplink
M
Number of octets in uplink direction.
Data Volume Downlink
M
Number of octets in downlink direction.
Change Condition
M
The change condition that resulted in this LOTV container.
Change Time
M
Timestamp at change.
Failurehandling Continue (only in e-GCDRs) O
Boolean indicating offline charging enabled.
UserLocationInformation
O
This field contains the User Location Information of the MS.
Notes:
LOTV related changes:
A new IE is included for LOTV container i.e. User location information.
The list of traffic data volumes now supports RAI and CGI/SAI changes, i.e. whenever RAI and/or
The list of traffic data volumes now supports RAI and CGI/SAI changes, i.e. whenever RAI and/or
CGI/SAI changes are detected; it will result in a ―List of Traffic Data Volumes‖ container being added
to the CDR, if location reporting is required and a report of CGI/SAI change is received.
to the CDR, if location reporting is required and a report of CGI/SAI change is received.