Cisco Cisco Packet Data Gateway (PDG) Manual De Mantenimiento
Configuration Management
Generally Available 06-30-2010
3-8
icmpv6 any-match
This command defines a rule definition to analyze and charge user traffic based on any
match (catch-all) expression for Internet Control Message Protocol Version 6 (ICMPv6).
match (catch-all) expression for Internet Control Message Protocol Version 6 (ICMPv6).
CLI (Ruledef Configuration Mode)
[ no ] icmpv6 any-match operator condition
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
icmpv6 code
This command defines a rule definition to analyze and charge user traffic based on the
ICMPv6 code.
ICMPv6 code.
CLI (Ruledef Configuration Mode)
[ no ] icmpv6 code operator code
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
icmpv6 type
This command defines a rule definition to analyze and charge user traffic based on the
ICMPv6 type.
ICMPv6 type.
CLI (Ruledef Configuration Mode)
[ no ] icmpv6 type operator type
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
ip version
This command specifies a rule definition to analyze and charge user traffic based on the IP
version—ipv4 or ipv6.
version—ipv4 or ipv6.
CLI (Ruledef Configuration Mode)
[ no ] ip version operator ip_version
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
system-limit
This command configures the system-wide Layer 4 flow limit.
CLI (ACS Configuration Mode)
system-limit l4-flows limit
{ default | no } system-limit l4-flows