Cisco Cisco Packet Data Gateway (PDG) Manual De Mantenimiento

Generally Available 06-30-2010

New Configuration Commands

3-21

SGSN Commands - New in Release 9.0

This section provides information on new commands available in Release 9.0.

apn-selection-default

New operator policy command has been added to enable and configure a default APN for
use when the normal APN selection process fails.

CLI (SGSN Operator Policy Configuration Mode)

apn-selection-default network-identifier <apn_net_id> [

require-subscription-apn network-identifier <apn_net_id>]

noapn-selection-default

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

gtp

New command to enable/disable the GTPC private extension in cases of loss of radio
coverage (LORC). This is one of the two commands required to enable the overcharging
protection feature.

CLI (SGSN APN Policy Configuration Mode)

gtp private-extension loss-of-radio-coverage send-to-ggsn

[send-to-peer-sgsn]

remove gtp private-extension loss-of-radio-coverage

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

gtpp trigger rat-change

SGSN support for this command has been added. This command configures whether or not
the RAT change interim CDR is generated for the inter-service handoff

CLI (GTPP Server Group Configuration Mode)

[ no ] gtpp trigger rat-change

default gtpp trigger

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

override-arp-with-ggsn-arp

New CLI has been added to enable configuration of the SGSN to negotiate or change or
"not" to negotiate or change the value of the ARP received from the GGSN. This
configuration of the SGSN will allow the ARP sent by GGSN in CPCR / UPCR / UPCQ to
be applicable as an overriding value.

CLI (SGSN Operator Policy Configuration Mode)

[ remove] override-arp-with-ggsn-arp