Cisco Cisco Packet Data Gateway (PDG) Manual De Mantenimiento
Configuration Management
Generally Available 06-30-2010
3-4
CLI (ROHC-Profile Decompress-Config Mode)
[ default ] context-timeout seconds
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
diameter send-ccri
This command configures sending CCR-I at the first user dcca-enabled-traffic detection, or
on receiving Create-PDP-Context-Request.
on receiving Create-PDP-Context-Request.
CLI (Credit Control Configuration Mode)
diameter send-ccri { session-start | traffic-start }
default diameter send-ccri
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
flow-control
Flow control is enabled by default on the Quad-Gig-E (QGLC) line card. If flow control is
not required, it can be disabled on a per-port basis using the
not required, it can be disabled on a per-port basis using the
no
option.
CLI (Ethernet Port Config Mode)
[ no ] flow-control
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
frame-relay
This command defines the Frame Relay characteristics of the port.
CLI (Channelized Port Configuration Mode)
frame-relay path path_id { ds1 connects | e1 connects} [ timeslots |
frame-relay [ intf-type intf_type [ lmi_type lmi_type ] ] ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
header-type
This command sets the size of the header frame for a Frame Relay-type message emanating
from a channelized line card.
from a channelized line card.
CLI (Card Configuration Mode)
[ default ] header-type header-size
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.