Cisco Cisco Packet Data Gateway (PDG) Manual De Mantenimiento

Generally Available    06-30-2010

Modified Configuration Commands

3-109

insert xheader_field_name { string-constant xheader_field_value | variable 

no insert xheader_field_name

This functionality is not supported at this time on the Web Element Manager.

This command defines a rule definition to analyze user traffic based on the protocol being 
transported by IP packets. The following keywords were added to this command: 

●

: Enables specifying a protocol by its name.

●

: Enables specifying a protocol lesser than or equal to, 

or greater than or equal to a protocol assignment number.

[ no ] ip protocol { { operator { protocol | protocol_assignment } } | { 

operator protocol_assignment } }

This functionality is not supported at this time on the Web Element Manager.

This command sets the IP Type of Service (ToS) octets being used in the charging action. 
The keyword to set IP ToS using a numeric value was modified to

 lower-bits tos_value

.

| af42 | af43 | be | ef | lower-bits tos_value } [ uplink | downlink ]

This functionality is not supported at this time on the Web Element Manager.

This command configures IPv6 ping options. A new keyword 

interface name

 has been 

added that specifies the originating source interface name.

ping6 interface name

This functionality is not supported at this time on the Web Element Manager.