Cisco Cisco Packet Data Gateway (PDG) Manual De Mantenimiento
Generally Available 06-30-2010
Modified Commands
5-99
show subscribers sgsn-only full
The counter ‘Network Sharing Capability’ has been added to the output of this command to
indicate if the MS supports network sharing or not.
indicate if the MS supports network sharing or not.
CLI (Exec Mode)
show subscribers sgsn-only full [ | { grep grep_options | more } ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show sgtpu statistics
The output of this command is now enhanced with the following counters:
●
Total Error Ind Sent
●
Sent to GGSN
●
Sent to RNC
●
Total Error Ind Rcvd
●
Rcvd from GGSN
●
Rcvd from RNC
●
Rcvd from GGSN through RNC
●
Rcvd from RNC through GGSN
CLI (Exec Mode)
show sgtpu statistics [ ggsn-address ipv4_address | iups-service
iups_srvc_name | rnc-address ipv4_address | sgtp-service sgtp_srvc_name |
gprs-service gprs_srvc_name nsei nse_id ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show gmm-sm statistics verbose
The output of this command is now enhanced with the following counters:
2G APN Selection Failure Statistics:
●
SDL-1:
●
All Packet Services Barred
●
PDP Type not Present, PDP Address Present
●
PDP Type not Present, APN Present
●
PDP Type, Address and APN not Present, No Single SubRec
●
SDL-2:
●
No SubRec matching PDP Type
●
No SubRec matching PDP Type and APN, No Wildcard APN
●
Multiple SubRecs matching PDP Type and APN, No Dynamic Address
●
Multiple SubRecs matching PDP Type and APN, with Dynamic Address