Cisco Cisco Packet Data Interworking Function (PDIF) Manual De Mantenimiento

Configuration Management

Generally Available 06-30-2010

3-4

CLI (ROHC-Profile Decompress-Config Mode)

[ default ] context-timeout seconds

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

diameter send-ccri

This command configures sending CCR-I at the first user dcca-enabled-traffic detection, or
on receiving Create-PDP-Context-Request.

CLI (Credit Control Configuration Mode)

diameter send-ccri { session-start | traffic-start }

default diameter send-ccri

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

flow-control

Flow control is enabled by default on the Quad-Gig-E (QGLC) line card. If flow control is
not required, it can be disabled on a per-port basis using the

option.

CLI (Ethernet Port Config Mode)

[ no ] flow-control

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

frame-relay

This command defines the Frame Relay characteristics of the port.

CLI (Channelized Port Configuration Mode)

frame-relay path path_id { ds1 connects | e1 connects} [ timeslots |

frame-relay [ intf-type intf_type [ lmi_type lmi_type ] ] ]

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

header-type

This command sets the size of the header frame for a Frame Relay-type message emanating
from a channelized line card.

CLI (Card Configuration Mode)

[ default ] header-type header-size

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.