Cisco Cisco Packet Data Interworking Function (PDIF) Manual De Mantenimiento

Generally Available 06-30-2010

New Configuration Commands

3-35

Firewall Commands - New in Release 8.1

MPORTANT

The new commands documented in this section are only available in Release 8.1.

bearer username

This command defines firewall rule definition to analyze user traffic based on user name of
the bearer flow.

CLI (ACS Firewall Ruledef Configuration Mode)

[ no ] bearer username [ case-sensitive ] operator value

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

firewall flow-recovery

This command configures Firewall flow recovery parameters.

CLI (ACS Configuration Mode)

firewall flow-recovery { downlink | uplink } [ timeout timeout ]

{ default | no } firewall flow-recovery { downlink | uplink }

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

firewall icmp-destination-unreachable-message-threshold

This command configures a threshold on the number of ICMP error messages sent by the
subscriber for a particular data flow.

CLI (ACS Configuration Mode)

firewall icmp-destination-unreachable-message-threshold messages

then-block-server

[ default | no ] firewall icmp-destination-unreachable-message -threshold

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

firewall nat-alg

This command enables/disables the specified NAT Application Level Gateway (ALG).

CLI (ACS Configuration Mode)

[ default | no ] firewall nat-alg { all | ftp | rtsp }

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.