Cisco Cisco Packet Data Interworking Function (PDIF) Manual De Mantenimiento
Configuration Management
Generally Available 06-30-2010
3-104
tcp dst-port
This command defines rule definition to analyze and charge user traffic based on
destination Transmission Control Protocol (TCP) port. The
destination Transmission Control Protocol (TCP) port. The
{ !range | range }
port-map port_map
option was added to this command. This enables the port number to
be selected from a range configured in a port map.
CLI (Ruledef Configuration Mode)
[ no ] tcp dst-port { operator port_number | { !range | range } {
start_range to end_range | port-map port_map } }
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
tcp src-port
This command defines rule definition to analyze and charge user traffic based on source
Transmission Control Protocol (TCP) port. The
Transmission Control Protocol (TCP) port. The
{ !range | range } port-map port_map
option was added to this command. This enables the port number to be selected from a
range configured in a port map.
range configured in a port map.
CLI (Ruledef Configuration Mode)
[ no ] tcp src-port { operator port_number | { !range | range } {
start_range to end_range | port-map port_map } }
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
udp dst-port
This command defines rule definition to analyze and charge user traffic based on
destination User Datagram Protocol (UDP) port number. The
destination User Datagram Protocol (UDP) port number. The
{ !range | range }
port-map port_map
option was added to this command. This enables the port number to
be selected from a range configured in a port map.
CLI (Ruledef Configuration Mode)
[ no ] udp dst-port { operator port_number | { !range | range } {
start_range to end_range | port-map port_map } }
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
udp either-port
This command defines rule definition to analyze and charge user traffic using either
(destination or source) User Datagram Protocol (UDP) port. The
(destination or source) User Datagram Protocol (UDP) port. The
{ !range | range }
port-map port_map
option was added to this command. This enables the port number to
be selected from a range configured in a port map.
CLI (Ruledef Configuration Mode)
[ no ] udp either-port { operator port_number | { !range | range } {
start_range to end_range | port-map port_map } }