Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
ASN Gateway Service Configuration Examples
Configuring ASN Gateway/FA Service ▀
Cisco ASR 5000 Series Access Service Network Gateway Administration Guide ▄
OL-22953-01
Configuring ASN Gateway/FA Service
This section provides a high-level series of steps and the associated configuration file examples for configuring the
system to perform as an ASN Gateway/FA with Mobile IP support in a test environment. For a more robust
configuration example, refer Sample Configuration.
system to perform as an ASN Gateway/FA with Mobile IP support in a test environment. For a more robust
configuration example, refer Sample Configuration.
To configure the system to perform as an ASN HA:
Set initial configuration parameters such as activating PACs or PSCs/PSC2s and creating the ingress and egress
VPN contexts by applying the example configurations found in the Initial Configuration section of this
chapter.
chapter.
Optional. Configure addition parameters to the ASN Gateway service by applying the example configurations
presented in ASN Gateway Configuration section.
Add basic subscribers to the system by applying the example configuration found in the Subscriber
Configuration section.
Create the FA service and associate the ASN Gateway service to FA context and Mobile IP by applying the
example configuration found in the Configuring the FA Service section.
Optional. Configure log system activity by applying the example configuration found in the ASN Gateway
Logging Configuration section of this chapter.
Save the configuration by applying the example configuration found in the Save the Configuration section of this
chapter.
Initial Configuration
Step 1
Specify the role of the processing cards in the chassis. The following example activates two PSCs, placing one in active
mode and labeling the other as redundant:
mode and labeling the other as redundant:
Step 2
Set local system management parameters. The following example sets the default subscriber and RADIUS group in the
local context:
local context: