Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Troubleshooting the ASN Gateway Service
Using the System’s Diagnostic Utilities ▀
Cisco ASR 5000 Series Access Service Network Gateway Administration Guide ▄
OL-22953-01
Testing a RADIUS Accounting Server
Use the following command to test a RADIUS accounting server. The tool generates an accounting start/stop pair for a
specific username.
specific username.
Important:
The username must already be configured on the RADIUS authentication server prior to executing
the test.
To execute the RADIUS authentication test tool, enter the following command:
Keyword/Variable
Description
Specifies that all configured RADIUS accounting servers should be tested.
Specifies the configured RADIUS authentication servers in a RADIUS server group named
for server group functionality.
Specifies the IP address of a specific RADIUS accounting server to test.
Specifies the TCP port over that the system should use when communicating with the RADIUS
accounting server to test.
accounting server to test.
Specifies a username that is supplied to the RADIUS server for accounting.
The following displays a sample of this command’s output for a successful response. A RADIUS accounting server with
an IP address of 192.168.1.102 on port 1813 was tested.
an IP address of 192.168.1.102 on port 1813 was tested.