Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Policy-Based Management and EV-DO Rev A
▀ EV-DO Rev A Important Commands
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22982-01
EV-DO Rev A Important Commands
Important:
If you are using EV-DO Rev A without Intelligent Traffic Control (ITC), you must define the type of
traffic policing as
. If you are using EV-DO Rev A with ITC, you can use commands to set flow-based
Rev A and ITC. Refer to the Intelligent Traffic Control chapter or additional information on configuring flow-based
traffic policies.
traffic policies.
The commands listed in the following table are used to configure and monitor EV-DO Rev A commands. Detailed
information, including description, syntax, and usage for each of these commands can be found in the Command Line
Interface Reference.
information, including description, syntax, and usage for each of these commands can be found in the Command Line
Interface Reference.
Table 33. EV-DO Rev A Commands
Command
Mode
Description
Configuration Commands
PDSN Service
Configuration
Configuration
Enables or disables the data-over signaling feature for A10
packets.
packets.
Subscriber
Configuration
Configuration
Sets the QoS Differentiated Services (DiffServ) marking that
a subscriber session is allowed.
a subscriber session is allowed.
Subscriber
Configuration
Configuration
Configures quality of service options for the current
subscriber using the differentiated services code point
method.
subscriber using the differentiated services code point
method.
Subscriber
Configuration
Configuration
Sets the quality of service setting to the system default.
Monitor Commands
Exec
Can be used to verify policy is applied.
Exec
Can be used to verify signal and data between the PDSN and
PCF, and between the PDSN and mobile.
PCF, and between the PDSN and mobile.
Exec
Can be used to verify Session Update Send Reason.
Exec
Can be used to verify GRE Key associated with A10
instance.
instance.
Exec
Can be used to verify RSVP related statistics/counters.
Exec
Can be used to verify summary rev-A flow and filter
information.
information.
Exec
Can be used to verify access technology.
Exec
Can be used to verify subscriber policy.