Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Direct Tunnel
▀ Direct Tunnel Configuration
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22982-01
Example Configuration
The following is an example of the commands used to disable direct tunneling with a GGSN:
Re-enabling a Direct Tunnel to a GGSN
To re-enable a direct tunnel access to a GGSN configured in an SGSN APN policy, use the following
procedure:
procedure:
•
Enter the global configuration mode.
•
Identify the existing SGSN operator policy with the SGSN APN policy.
•
Identify the SGSN APN policy with the GGSN.
•
Enable the direct tunnel functionality.
Example Configuration
The following is an example of the commands used to re-enable direct tunneling with a GGSN:
Disabling or Enabling Direct Tunnels to Specific RNC(s)
SGSN access to radio access controllers (RNCs) is configured in the IuPS service.
Each IuPS service can include multiple RNC configurations that determine communications and features depending on
the RNC.
the RNC.
By default, direct tunnel functionality is enabled for all RNCs.