Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Intelligent Traffic Control
▀ Configuring Flow-based Traffic Policing
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22982-01
is name of the traffic policy you configured in Configuring Policy Maps section for the
flow-based traffic policing. A maximum of 16 Policy Maps can be assigned in a Policy Group.
For description and variable values of these commands and keywords, refer to the Traffic Policy-Map
Configuration Mode Commands chapter of the Command Line Interface Reference.
Configuring a Subscriber for Flow-based Traffic Policing
This section provides information and instructions for configuring the subscriber for Flow-based Traffic Policing.
Notes:
is the name of the destination context configured during Class-Map configuration for
flow-based traffic policing.
is the name of the subscriber profile you want to configure for the flow-based traffic policing.
is name of the traffic policy group you configured in Configuring Policy Groups section
for the flow-based traffic policing. A maximum of 16 Policy groups can be assigned to a subscriber profile.
For description and variable values of these commands and keywords, refer to the Traffic Policy-Group
Configuration Mode Commands chapter of the Command Line Interface Reference.
Verifying Flow-based Traffic Policing Configuration
Step 1
Verify that your flow-based traffic policing is configured properly by entering the following command in Exec Mode:
The output of this command displays flow-based information for a subscriber session.