Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Ty Interface Support
▀ Enabling IMS Authorization and QoS Profile
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22982-01
Enabling IMS Authorization and QoS Profile
This section describes the procedure to configure the QoS profile identifier for QoS mapping and associates an IMS
authorization through Ty interface at the service level.
authorization through Ty interface at the service level.
This section also provides the configuration to associate an IMS authorization service functionality to a previously
configured subscriber within the same context in cdma2000 networks.
configured subscriber within the same context in cdma2000 networks.
Configuring IMS Authorization in PDSN Service
This section describes how to associate an IMS authorization service at the service level for all subscriber in that service
and to create the QoS profile id for QoS mapping in cdma2000 networks.
and to create the QoS profile id for QoS mapping in cdma2000 networks.
This procedure assumes that you are at the Context Configuration mode level in the same context as specified in
Configuring IMS Authorization Service section and following prompt is appearing:
Configuring IMS Authorization Service section and following prompt is appearing:
Notes:
You can configure qos-profile parameters to define description, downlink/uplink bandwidth, drop-rate, latency,
and the maximum drop percentage.
Repeat this configuration to add additional subscribers for IMS Authorization service.
Verifying your configuration for the PDSN Service
Step 1
Verify the IMS authorization configuration for the PDSN service(s) by entering the following command:
Step 2
Save your configuration as described in Saving Your Configuration chapter.