Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Access Control Lists
▀ Applying IP ACLs
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22982-01
The context name is the name of the ACL context containing the interface to which the ACL is to be applied.
If neither the
nor the
keyword is specified, the ACL will be applied to all packets in and out.
The ACL to be applied must be configured in the context specified by this command.
Up to 8 ACLs can be applied to a group provided that the number of rules configured within the ACL(s) does not
exceed the 128 rule limit for the interface.
Verifying the ACL Configuration to the Subscriber Named default
These instructions are used to verify the ACL configuration.
Step 1
Verify that your ACL lists were applied properly by entering the following command in Exec Mode:
is the name of the context containing the subscriber default to which the ACL(s) was/were applied.
The output of this command displays the configuration of the entire context. Examine the output for the commands
pertaining to interface configuration. The commands display the ACL(s) applied using this procedure.
pertaining to interface configuration. The commands display the ACL(s) applied using this procedure.